FMMTL718 document number: ds33132 rev. 2 - 2 1 of 5 www.diodes.com june 2011 ? diodes incorporated a product line o f diodes incorporated FMMTL718 20v pnp silicon low saturati on transistor in sot23 features and benefits ? bv ceo > -20v ? i c = -1a continuous collector current ? i cm = -2a peak pulse current ? low saturation voltage v ce(sat) < -320mv @ -1a ? h fe characterised up to -1.5a for high current gain hold-up ? 500mw power dissipation ? complementary part number fmmtl618 ? lead free, rohs compliant (note 1) ? halogen and antimony free "green" device (note 2) ? qualified to aec-q101 standards for high reliability mechanical data ? case: sot-23 ? ul flammability rating 94v-0 ? case material: molded plastic. ? moisture sensitivity: level 1 per j-std-020d ? terminals: matte tin finish annealed over copper plated alloy 42 leadframe. solderable per mil-std-202, method 208 ? weight: 0.008 grams (approximate) applications ? mosfet gate driving ? dc-dc converters ? charging circuit ? power switches ordering information (note 3) product marking reel size (inches) tape width (mm) quantity per reel FMMTL718ta l78 7 8 3,000 notes: 1. no purposefully added lead. 2. diodes inc.`s ?green? policy can be found on our website at http://www.diodes.com 3. for packaging details, go to our website at http://www.diodes.com. marking information l78 = product type marking code c e b top view sot23 device symbol top view pin - out
FMMTL718 document number: ds33132 rev. 2 - 2 2 of 5 www.diodes.com june 2011 ? diodes incorporated a product line o f diodes incorporated FMMTL718 maximum ratings @t a = 25c unless otherwise specified characteristic symbol value unit collector-base voltage v cbo -20 v collector-emitter voltage v ceo -20 v emitter-base voltage v ebo -5 v continuous collector current i c -1 a peak pulse current i cm -2 a base current i b -200 ma thermal characteristics @t a = 25c unless otherwise specified characteristic symbol value unit power dissipation (note 4) p d 500 mw thermal resistance, junction to ambient (note 4) r ja 250 q c/w thermal resistance, junction to lead (note 5) r jl 197 q c/w operating and storage temperature range t j, t stg -55 to +150 q c notes: 4. for a device surface mounted on 15 mm x 15mm fr4 pcb with high coverage of single sided 1 oz copper, in still air cond itions; the device is measured when operating in a steady-state condition. 5. thermal resistance from junction to solder-point (at the end of the collector lead). electrical characteristics @t a = 25c unless otherwise specified characteristic symbol min typ max unit test condition collector-base breakdown voltage bv cbo -20 -65 v i c = -100 a collector-emitter breakdown voltage (note 6) bv ceo -20 -55 v i c = -10 ma emitter-base breakdown voltage bv ebo -5 -8.8 v i e = -100 a collector cutoff current i cbo -10 na v cb = -15v emitter cutoff current i ebo -10 na v eb = -4v collector emitter cutoff current i ces -10 na v ce = -15v static forward current transfer ratio (note 6) h fe 300 300 200 120 50 500 450 320 200 80 i c = -10ma, v ce = -2v i c = -100ma, v ce = -2v i c = -0.5a, v ce = -2v i c = -1a, v ce = -2v i c = -1.5a, v ce = -2v collector-emitter saturation voltage (note 6) v ce(sat) -33 -130 -230 -315 -50 -180 -320 -450 mv mv mv mv i c =- 100ma, i b = -10ma i c =- 500ma, i b = -20ma i c = -1a, i b = -50ma i c = -1.5a, i b = -100ma base-emitter turn-on voltage(note 6) v be ( on ) -0.85 -1.0 v i c = -1.25a, v ce = -2v base-emitter saturation voltage(note 6) v be ( sat ) -0.95 -1.1 v i c = -1.25a, i b = -100ma equivalent on-resistance r ce ( sat ) 210 m ? i c = -1.5a output capacitance c obo 9 12 pf v cb = -10v, f = 1mhz transition frequency f t 265 mhz v ce = -10v, i c = -50ma, f = 100mhz turn-on time t on 108 ns v cc =-10v, i c =-1a i b1 = i b2 = -10ma turn-off time t off 121 ns note: 6. measured under pulsed conditions. pulse width 300 s. duty cycle 2%
FMMTL718 document number: ds33132 rev. 2 - 2 3 of 5 www.diodes.com june 2011 ? diodes incorporated a product line o f diodes incorporated FMMTL718 typical electrical characteristics
FMMTL718 document number: ds33132 rev. 2 - 2 4 of 5 www.diodes.com june 2011 ? diodes incorporated a product line o f diodes incorporated FMMTL718 package outline dimensions suggested pad layout sot23 dim min max typ a 0.37 0.51 0.40 b 1.20 1.40 1.30 c 2.30 2.50 2.40 d 0.89 1.03 0.915 f 0.45 0.60 0.535 g 1.78 2.05 1.83 h 2.80 3.00 2.90 j 0.013 0.10 0.05 k 0.903 1.10 1.00 k1 - - 0.400 l 0.45 0.61 0.55 m 0.085 0.18 0.11 0 8 - all dimensions in mm dimensions value (in mm) z 2.9 x 0.8 y 0.9 c 2.0 e 1.35 a m j l d f b c h k g k1 x e y c z
FMMTL718 document number: ds33132 rev. 2 - 2 5 of 5 www.diodes.com june 2011 ? diodes incorporated a product line o f diodes incorporated FMMTL718 important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries reserve the right to ma ke modifications, enhancements, im provements, corrections or ot her changes without further notice to this doc ument and any product described herein. diodes incorporated does not assume any liabi lity arising out of the application or use of this document or any produc t described herein; neither does diodes incorporated convey any lic ense under its patent or trademark rights, nor the rights of others. any customer or user of this docum ent or products described herein i n such applications shall assume all risks of such use and will agree to hold diodes incorporated and a ll the companies whose products are represented on diodes incorporated w ebsite, harmless against all damages. diodes incorporated does not warrant or accept any liability w hatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes incorporated products for any unintended or unauthorized application, customer s shall indemnify and hold diodes incorporated and its representatives harmless against all claims, dam ages, expenses, and attorney fee s arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized applicati on. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or mo re united states, international or foreign trademarks. life support diodes incorporated products are specifically not authorized for use as critical co mponents in life support devices or systems without the express written approval of the chief executive officer of diodes incorporated. as used herein: a. life support devices or system s are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to resu lt in significant injury to the user. b. a critical component is any component in a life support devic e or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible fo r all legal, regulatory and safety-related requirements concerning their products and any use of diodes incorporated products in such safety-critical, lif e support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporated and its representatives against any damages arising out of the use of di odes incorporated products in such safety- critical, life support devices or systems. copyright ? 2011, diodes incorporated www.diodes.com
|
